SEASON
Description
LED bar PRO · 24 V
LED bar 07 PRO
- White LEDs
- 7
- Blue LEDs
- 1
- Length
- 220 mm
- Power
- 1,44 W
- Current draw
- 60 mA
- Max in series
- 32
Seven white LEDs at 5700 K with colour rendering above 95 CRI to simulate daylight, plus one blue LED for the moonlight effect. It runs at 24 V: for the same light it draws half the current of a 12 V bar, and twice as many can be connected in series on the same line. With the SOL-LED controller, light intensity and light hours are set via PWM signals, without overloading the controller. Input and output connectors, to connect the bars in series.
Technical data
| Dimensions | 220 x 24 x 10 mm |
| Power supply | 24 Vdc |
| Colour temperature | 5700 K |
| Colour rendering | > 95 CRI |
| White light current | 60 mA |
| Blue light current | 15 mA |
| Daylight power | 1,44 W |
| Night light power | 0,18 W |
| White light control | PWM 3,3 V |
| Base | aluminium |
| Connector | JST XH 4-pole |
| Wiring and connector rating | 2 A — max 32 bars in series |
| Max operating temperature | 40 °C |
| Certifications | CE, IP00 |
| Warranty | 2 years |
Which wiring you need
| Cage | LED bars | Wiring |
|---|---|---|
| 60 cm whole | 1 | 40 cm |
| 60 cm whole | 2 | 18 cm |
| 60 cm split | 1 per compartment | 18 cm |
| 90 cm whole | 2 | 25 cm |
| 90 cm split | 1 per compartment | 25 cm |
| 120 cm whole | 2 | 40 cm |
| 120 cm split | 1 per compartment | 40 cm |
Measurements calculated with the bars evenly spaced on the ceiling, 1 cm between one cage and the next and at least 2% slack on the longest connection. In 90 and 120 cm cages there are always two bars; in split cages there is one bar per compartment. If the gap between cages is different, use the «Which cable does your cage need?» diagram above. The 15 cm wiring is single-ended: it is for starting from the controller, not for joining two bars.
Reviews
There are no reviews yet.