SEASON
Description
LED bar PRO · 12 V
LED bar 03 PRO
- White LEDs
- 3
- Blue LEDs
- 1
- Length
- 97 mm
- Power
- 0,72 W
- Current draw
- 60 mA
- Max in series
- 20
Three white LEDs at 5700 K with colour rendering above 95 CRI, plus one blue LED for the moonlight effect. It is the shortest bar in the range: designed for small compartments where a long bar would not fit. With the SOL-LED controller, light intensity and light hours are set via PWM signals. Input and output connectors, to connect the bars in series.
Technical data
| Dimensions | 97 x 24 x 10 mm |
| Power supply | 12 Vdc |
| Colour temperature | 5700 K |
| Colour rendering | > 95 CRI |
| White light current | 60 mA |
| Blue light current | 15 mA |
| Daylight power | 0,72 W |
| Night light power | 0,18 W |
| White light control | PWM 3,3 V |
| Base | aluminium |
| Connector | JST XH 4-pole |
| Wiring and connector rating | 2 A — max 20 bars in series |
| Max operating temperature | 40 °C |
| Certifications | CE, IP00 |
| Warranty | 2 years |
Which wiring you need
| Cage | LED bars | Wiring |
|---|---|---|
| 60 cm whole | 1 | 60 cm |
| 60 cm whole | 2 | 22 cm |
| 60 cm split | 1 per compartment | 22 cm |
| 90 cm whole | 2 | 39 cm |
| 90 cm split | 1 per compartment | 39 cm |
| 120 cm whole | 2 | 60 cm |
| 120 cm split | 1 per compartment | 60 cm |
Measurements calculated with the bars evenly spaced on the ceiling, 1 cm between one cage and the next and at least 2% slack on the longest connection. In 90 and 120 cm cages there are always two bars; in split cages there is one bar per compartment. If the gap between cages is different, use the «Which cable does your cage need?» diagram above. The 15 cm wiring is single-ended: it is for starting from the controller, not for joining two bars.
Reviews
There are no reviews yet.